Sliding aluminium doors fabricated in Durban and installed across Pinetown and surrounding suburbs. Standard residential systems and multi-track configurations, sized to your opening. Free site measure before any quote.
SLIDING
Sliding aluminium doors are fabricated to size — panel width, glass thickness, frame profile and track type all depend on the actual opening. Pinetown spans from lower-lying residential streets with persistent humidity to elevated ridges like Cowies Hill and Padfield Park that catch driving summer rain. Those differences affect weather sealing, drainage and hardware choice. Our process starts with a site measure, then a written specification, so the system suits the property rather than a generic template.
Two common approaches to sliding doors, and how the choice depends on the opening rather than preference.
| Parameter | Standard Residential System | Multi-Track System |
|---|---|---|
| Track arrangement | Typically two-track | Two or three independent tracks |
| Panels that can stack to one side | Limited — usually one or two sliding panels | Up to four or more, depending on opening |
| Typical opening span | Often up to around 3.0m | Wider openings where a larger clear passage is wanted |
| Frame profile | Standard residential profile | Heavier profile, engineered for larger glass areas |
| Glass specification | Toughened or laminated safety glass | Laminated and/or thicker glass often specified |
| Typical application | Single patio door, standard living rooms | Wide entertainment openings, larger glass areas |
| Considerations | Straightforward fit in standard openings | Opening size, wind exposure and structural support matter more |
Which system is appropriate is determined during the site measure. The table above outlines common differences — not a universal specification for every job. Frame depth, glass thickness and profile series are confirmed per opening.
Sliding doors are built in fixed panel arrangements. The layout that suits your opening depends on how wide it is and where you want the clear passage.
One fixed panel, one sliding panel. Common for narrower patio openings where a single clear passage is needed.
Both panels slide — one in each direction. Useful when the clear opening should sit centrally in the aperture.
One fixed panel, two sliding panels. A middle option for medium-width openings where more glass area is wanted.
Two fixed outer panels, two central sliders. Often used for wider patios where a generous central opening is wanted.
The configuration is confirmed during the site measure. Not every layout suits every opening — frame size, glass weight and structural support all affect what is practical.
Safety glazing is not optional in defined areas. Here is what it means in practice.
This is the section of the National Building Regulations that governs glazing safety. Safety glazing is required in defined areas — including doors, sidelights and glazing within 500mm of the floor. The glass type and thickness depend on the pane size and its location. We specify glazing to meet these requirements for the actual opening.
Ridge suburbs like Cowies Hill, Padfield Park and Sarnia sit higher and are more exposed to wind-driven rain. Lower-lying areas see more persistent humidity. Weather sealing, drainage and hardware selection are adjusted to suit the exposure of the actual opening.
Correct installation affects performance as much as the product itself. Setting blocks, drainage weeps, expansion gaps and weather sealing all matter. Our installers work to standard industry practice for aluminium door installation in residential settings, with the specification confirmed in the written quote.
What is included in a Bluminium sliding door order, and what is specified per project.
Options such as double glazing, thermal-break configurations or upgraded hardware are specified per project — they are not included in every job by default. The quote lists what is included for your specific opening.
The same process whether it is one door or a larger opening.
We visit the property, measure the opening and note floor levels, lintel condition and access considerations. This determines what can be fitted.
An itemised quote covering the system, glass, finish and installation. Options are listed so you can see what is included.
Frames are cut, welded, glazed and finished in our Durban facility. Typical lead time is 2–4 weeks, confirmed with the quote.
Our teams install, align and seal the door. Most standard residential installations are completed in a single day.
We fabricate in Durban and install across Pinetown and the surrounding communities. Below is what we commonly encounter in each area.
Property types differ across the Pinetown service area. A standard home in New Germany has different requirements from an elevated property in Cowies Hill or a newer unit in Cornubia. The notes below describe common patterns — they are not assumptions about every property. The site measure confirms what is actually needed.
Mixed residential stock, from older homes with non-standard openings to more recent builds. Retrofit measurement matters here — not every existing aperture suits a sliding door without adjustment. The site measure confirms what is feasible before any quote is issued.
A mix of established homes and small-scale residential upgrades. Standard two-panel and three-panel sliding configurations are common. Where an extension is being added, structural support for the new opening is assessed on site.
Higher-lying properties with more exposure to wind-driven rain. Weather sealing, drainage weeps and hardware selection are adjusted to suit the exposure. Wider openings may call for multi-track systems and thicker laminated glass, depending on the actual aperture.
Predominantly residential. Sliding doors are typically fitted to existing patio or living-room openings, with the site measure confirming whether the aperture can be used as-is or requires adjustment.
Pinetown’s fabrication and trade activity is concentrated around Westmead and New Germany. Our crews work from the Durban workshop and coordinate access directly with homeowners — including in estates and complexes where installation logistics need planning.
A broad mix of property types, from standard family homes to newer residential developments. Two-panel and three-panel sliding doors are commonly specified. Site access and measurement are confirmed before fabrication begins.
Questions that come up when specifying a sliding door in Pinetown.
In many cases, yes — provided the structural lintel and side walls can carry the load. During the free site measure, the existing opening, track bed and floor levels are checked. A recessed or surface-mount track solution is recommended based on the actual aperture. Some openings require building work; this is identified during measurement, before any quote is issued.
A standard residential sliding door typically uses a two-track frame and suits single patio openings — commonly up to about 3.0m wide with panels up to around 2.4m. A multi-track system uses two or three independent tracks in a heavier frame profile, allowing more panels to stack to one side. Multi-track is usually specified where a wider opening or a larger clear glass area is wanted. Which system is appropriate depends on the opening size, wind exposure and glass specification.
Safety glazing is a legal requirement in defined areas under SANS 10400 Part N — including doors, sidelights and glazing within 500mm of the floor. Toughened safety glass is commonly specified for sliding door panels. Laminated safety glass is often chosen where an extra security layer or improved acoustic performance is useful. Double glazing is an option where thermal insulation or condensation control matters. The right specification depends on the location of the door, the size of the glass panes and what you want the door to do.
Pinetown sits between coastal humidity and inland ridge weather. Properties on the higher ridges — Cowies Hill, Padfield Park, Sarnia — can be exposed to stronger wind-driven rain, which puts more demand on seals, drainage and the frame profile. Lower-lying areas tend to see more persistent humidity. Weather sealing, drainage weeps and the choice of hardware are adjusted accordingly during the site measure.
After the site measure and written quote, fabrication typically takes 2–4 weeks depending on the system and finish. A standard residential sliding door is often installed in a single day. Larger multi-track systems or jobs that require building work may take longer. A firmer timeline is confirmed with the quote.
Aluminium sliding doors generally need little maintenance. Keeping the bottom track free of grit and debris helps the rollers run smoothly. A periodic wipe-down with a damp cloth and mild detergent keeps the frames clean. In coastal and humid areas, a freshwater rinse every few months helps remove salt deposits. Rollers and tracks may benefit from a silicone-based lubricant occasionally. The specific hardware fitted determines the exact maintenance routine.
Security depends on the specification. Sliding doors can be fitted with multi-point locking, anti-lift blocks and laminated or toughened safety glass. The frame profile and roller system also affect resistance to forced entry. For more exposed openings, the locking hardware and glass type can be upgraded. Security is discussed as part of the specification process, not assumed.
Detailed guides on the technical decisions behind sliding door quotes.
Tell us roughly how wide the opening is and what the door is for. We will arrange a site measure, confirm what is feasible and provide a written quote. No obligation.
If a sliding door is not the right fit for the opening, one of these may be.
